The compression load sensor RHP-G is made of high nickel alloy steel & designed particularly to measure the elevator lift car loading whether the elevator car's weight is overloaded or not, thereby to ensure the safe operation of the elevator , and it is typically placed at the position of rope attachment and between the wire rope hitch plates and provide more accuracy measurement.
1. Load cell especially designed to work a compression.
2. Made of alloy steel of high resistance with anti- corrosion treatment.
3. Field of application: on the dead end hitch or in the terminals of the traction cable (elevators, cranes...).
4. It is suitable for lift modernization or retrofit
5. Particular designed for elevator wire rope hitch plates,measure the load
Model | RHP-B |
Rated Load | 2500kg |
Sensitivity | 2.0+-0.02%mv/v |
Total error | +/-0.5% F.S |
Excitation | 5-12V DC |
Creep Error | +/-0.02% F.S |
Insulation Impedance | ≥5000 Ohm |
T C SPAN | +/-0.02% F.S./10 degree Celsius |
Operation temperature range | -30 to 70 degree Celsius |
Input Resistance | 380+/-20ohm |
Output Resistance | 352+/-3 ohm |
Safe Overload | 150% F.S. |
Ultimate Overload | 200% F.S. |
Construction | Alloy Steel |
Protection Class | IP68 |
Cable Length | 8M |
| Contactpersoon : | Jessy |
|---|
